Avaya M770 用户手册
Chapter 10
Managing PNNI Routing
Avaya M770 ATM Switch User’s Guide
157
Set the PNNI summary address prefix
Use the following command to set a PNNI summary address prefix.
Enable the PNNI summary address prefix
To enable pnni summary address prefix use the following command.
Note:
When a pnni summary address is enabled summary show State = advertising
and RowStatus = Active.
Disable the PNNI summary address prefix
To disable PNNI summary address prefix use the following command.
Note:
When a PNNI summary address is disabled summary show State = inactive
and RowStatus = notInService.
Command:
M15-155s8:/>route pnni config summary set <type> <prefix> <len> <suppress>
<level>
<level>
Parameters:
<type>
<prefix>
<length>
<suppress>
<level>
I(nternal) or E(xterior)
The ATM address prefix. Each octes is in hex and is separated by a
“.”
length of the prefix in bits (0-152)
T(rue) or F(alse)
Internal level number. 1 is the lowest (physical) node
The ATM address prefix. Each octes is in hex and is separated by a
“.”
length of the prefix in bits (0-152)
T(rue) or F(alse)
Internal level number. 1 is the lowest (physical) node
Examples:
set I 39.84.0f.80.01.bc.61.de.81.00.00.60.00 104 F 1
Command:
M15-155s8:/>route pnni config summary enable <type> <prefix> <len> <level>
Parameters:
<type>
<prefix>
<length>
<level>
I(nternal) or E(xterior)
The ATM address prefix. Each octes is in hex and is separated by a
“.”
length of the prefix in bits (0-152)
Internal level number. 1 is the lowest (physical) node
The ATM address prefix. Each octes is in hex and is separated by a
“.”
length of the prefix in bits (0-152)
Internal level number. 1 is the lowest (physical) node
Examples:
enable I 39.84.0f.80.01.bc.61.de.81.00.00.60.00 104 1
Command:
M15-155s8:/>route pnni config summary disable <type> <prefix> <len> <level>