Avaya M770 用户手册
Chapter 10
Managing PNNI Routing
158
Avaya M770 ATM Switch User’s Guide
Remove the PNNI summary address prefix
To remove the PNNI summary address prefix use the following command.
Set the PNNI summary table to the default
Use the following command to set the PNNI summary table to its default values.
For lowest-level node it is the switch’s ATM prefixs. For higher-level nodes it’s the
switch prefix where its length in bits is equal to the level where it resides.
For lowest-level node it is the switch’s ATM prefixs. For higher-level nodes it’s the
switch prefix where its length in bits is equal to the level where it resides.
<type>
<prefix>
<length>
<level>
I(nternal) or
E(xterior)
The ATM
address prefix.
Each octes is in
hex and is
separated by a
“.”
length of the
prefix in bits (0-
152)
Internal level
number. 1 is
the lowest
(physical) node
E(xterior)
The ATM
address prefix.
Each octes is in
hex and is
separated by a
“.”
length of the
prefix in bits (0-
152)
Internal level
number. 1 is
the lowest
(physical) node
<type>
<prefix>
<length>
<level>
Examples:
disable I 39.84.0f.80.01.bc.61.de.81.00.00.60.00 104 1
Command:
M15-155s8:/>route pnni config summary remove <type> <prefix> <len>
<level>
<level>
Parameters:
<type> - I(nternal) or E(xterior)
<prefix> - The Atm address prefix
each octet is in hex and separate with '.'
<length> - length of the prefix in bits (0-152)
<level> – Internal level number. 1 is the lowest
(physical) node
Examples:
set I 39.84.0f.80.01.bc.61.de.81.00.00.60.00 104 1
Command:
M15-155s8:/>route pnni config summary default <level>