Motorola WS5100 用户手册

5-32   WS5100 Series Switch System Reference Guide

 

6. Click the 

 button to add a member to the redundancy group. The redundancy group should be disabled 

to conduct an Add or Delete operation. For more information, see 

.

Use the 

 screen (in conjunction with its parent Member screen) to display additional (more detailed) 

information on the redundancy group (cluster) member selected within the Member screen. 

To review the details

1. Select

> 

 from the main menu tree.

The Redundancy screen displays with the Configuration tab selected.

2. Select the 

 tab.

3. Highlight a member of the group and select the 

button. 

4. Refer to the following redundancy member information: 

 

Displays 

the IP addresses of the members of the redundancy group. There are a 

minimum of 2 members needed to define a redundancy group, including this current 
module

Displays the current status of this group member. This status could have the following 
values:

• Configured: The member is configured on the current wireless service module.

• Seen: Heartbeats can be exchanged between the current switch and this member.

• Invalid: Critical redundancy configuration parameter(s) of the peer (heartbeat time, 

discovery time, hold time, Redundancy ID, Redundancy Protocol version of this member) 
do not match this switch’s parameters.

• Not Seen: The member is no more seen by this switch. 

• Established: The member is fully established with this current module and licensing 

information already been exchanged between this switch and the member.