Motorola WS5100 用户手册

8-19

 

To view the switch’s existing ping configuration:

1. Select 

 > 

 from the main menu. 

2. Refer to the following information displayed within the Configuration tab: 

3. To edit the properties of an existing ping test, select a ping based on the description listed and click the 

Edit button. For more information, see 

.

4. Select an existing ping test from those displayed within the Configure tab and click the 

 button to 

remove the ping test from those displayed.

5. Click the Add button to display a screen used to define the attributes of a new ping test. For more 

information, see 

Displays the user assigned description of the ping test. The name is read-only. Use this title 
to determine whether this test can be used as is, modified under the same description or if 
a new ping test is required.

Displays the IP address of the target device. This is the numeric destination for the device 
sent the ping packets.

Displays the timeout value (in seconds) used to timeout the ping test if a round trip packet is 
not received by the switch from its target device.

Displays the number of packets transmitted to the target IP address to discern the round trip 
time between the switch and its connected device.

Displays the interval between ping packet transmissions.