Motorola WS5100 用户手册

8-21

 

2. Click the

button at the bottom of the Configuration tab. 

3. Enter the following information to define the properties of the new ping test: 

4. Click 

 to save and add the changes to the running configuration and close the dialog.

5. Refer to the 

 field for the current state of the requests made from applet. This field displays error 

messages if something goes wrong in the transaction between the applet and the switch

6. Click 

to return back to the Configuration tab without implementing changes.

Enter a short name for the ping test to describe either the target destination of the ping 
packet or the ping test’s expected result. Use the name provided in combination with the ping 
test description to convey the overall function of the test.

Ensure the description is representative of the test, as this is the description displaying 
within the Configuration tab.

Enter the IP address of the target device. This is the numeric (non DNS address) destination 
for the device transmitted the ping packets.

Define the number of ping packets transmitted to the target device. This value represents 
the number of packets to be transmitted to the target IP address to discern the round trip time 
between the switch and its connected device.

Configure the timeout value (in seconds) used to timeout the ping test if a round trip packet 
is not received by the switch from its target device. Ensure this interval is long enough to 
account for network congestion between the switch and its target device.

Define the interval (in seconds) between ping packet transmissions. Define a longer interval 
if high levels of network congestion are anticipated between the switch and its target 
device. Use a value of 0 to execute a single ping test or stop a currently running ping test.