Schneider Electric SR2MAN01 用户手册

PROGRAMMING Menu

SR2MAN01 11/2007

49

Diagram lines are deleted line-by line. The procedure is the following:

The procedure is the following:

Note: Accessible only in LD mode / smart relay in STOP mode.

1

Place the cursor over the line to delete.

2

Delete all the elements in the line (see Method for Entering a Contact or Coil, p. 43): 
(Links, contacts and coils) to obtain an empty line.

3

Press the 

Shift key to display the contextual menu.

Illustration: 

Simultaneously pressing 

Shift and Del opens the confirmation window.

4

Confirm by pressing 

Menu/OK.

Note: It is possible to delete all diagram lines contained in the smart relay. In order 
to do this, select the CLEAR PROG. option from the main menu, and confirm the 
deletion of all the control diagram lines.

1

Place the cursor over the line located immediately below the line to create.

2

Press the 

Shift key to display the contextual menu.

3

Press the 

Ins key (while holding down the Shift key) to create the line.