Milwaukee 2426-22 用户手册

For a complete listing of accessories refer to your 
MILWAUKEE  Electric Tool catalog or go online 
to www.milwaukeetool.com. To obtain a catalog, 
contact your local distributor or service center.

Maintaining Tool 
Keep your tool, battery pack and charger in good re-
pair by adopting a regular maintenance program. 
After six months to one year, depending on use, 
return the tool, battery pack and charger to a 
MILWAUKEE service facility for:
• Lubrication
• Mechanical inspection and cleaning (gears, 

spindles, bearings, housing, etc.)

• Electrical inspection (battery pack, charger, 

motor)

• Testing to assure proper mechanical and 

electrical operation

If the tool does not start or operate at full power 
with a fully charged battery pack, clean the contacts 
on the battery pack. If the tool still does not work 
properly, return the tool, charger and battery pack, 
to a MILWAUKEE service facility for repairs.

Cleaning
Clean dust and debris from charger and tool vents. 
Keep tool handles clean, dry and free of oil or grease. 
Use only mild soap and a damp cloth to clean the 
tool, battery pack and charger since certain cleaning 
agents and solvents are harmful to plastics and other 
insulated parts. Some of these include gasoline, 
turpentine, lacquer thinner, paint thinner, chlorinated 
cleaning solvents, ammonia and household deter-
gents containing ammonia. Never use fl ammable or 
combustible solvents around tools.

Repairs
For repairs, return the tool, battery pack and char-
ger to the nearest service center.

the battery pack from the charger or tool 
before performing any maintenance. Never 
disassemble the tool, battery pack or charger. 
Contact a MILWAUKEE service facility for ALL 
repairs.

Selecting speed
To set the maximum speed, rotate the speed dial. 
Set the speed dial to "2" for the lowest speed 
(5000 OPM). Set the speed dial to "12" for the 
highest speed (20,000 OPM).

Starting/Stopping
1. To  start the tool, grasp the handle and slide the 

switch forward to the ON (I) position.  

2. Allow the tool to come to full speed before begin-

ning work. 

3. Control pressure and surface contact between 

accessory and workpiece. 

4. To  stop the tool, slide the switch back to the 

OFF (0) position. Make sure the tool comes to a 
complete stop before laying the tool down. 

TECHTRONIC INDUSTRIES' warranty is for 5 year since the original purchase date.

This warranty card covers any defect in material and workmanship on this Power Tool.

To make this warranty valid, present this warranty card, sealed/stamped by the distributor or store where you purchased the 

product, to the Authorized Service Center (ASC). Or, if this card has not been sealed/stamped, present the original proof of 

purchase to the ASC.

Call toll-free 1 800 832 1949 to fi nd the nearest ASC, for service, parts, accessories or components.   

Take the product to the ASC, along with the warranty card sealed/stamped by the distributor or store where you purchased the 

product, and  there any faulty piece or component will be replaced without cost for you. We will cover all freight costs relative 

with this warranty process. 

This warranty is not valid in the following situations: 

a) When the product is used in a different manners from the end-user guide or instruction manual. 

b) When the conditions of use are not normal.

c) When the product was modifi ed or repaired by people not authorized by TECHTRONIC INDUSTRIES.

Note: If cord set is damaged, it should be replaced by an Authorized Service Center to avoid electric risks. 
 

     SERVICE 

AND 

ATTENTION 

CENTER

     Rafael 

Buelna 

No.1.

     Col. 

Tezozomoc 

Mexico, 

Azcapotzalco 

D.F.

     Ph. 

01 

800 

832 

1949

     IMPORTED 

AND 

COMMERCIALIZED 

BY:

     TECHTRONIC 

INDUSTRIES 

MEXICO, 

.S.A. 

DE 

C.V.

 

 

 

 

 

Av. Santa Fe 481 piso 6, Col. Curz Manca. 

     CP 

05349, 

Cuajimalpa, 

D.F.

Every MILWAUKEE power tool (including cordless product – tool, battery pack(s) - see separate & distinct CORDLESS BAT-

TERY PACK LIMITED WARRANTY statements & battery charger and Work Lights*) is warranted to the original purchaser only 

to be free from defects in material and workmanship.  Subject to certain exceptions, MILWAUKEE will repair or replace any part 

on an electric power tool which, after examination, is determined by MILWAUKEE to be defective in material or workmanship 

for a period of fi ve (5) years* after the date of purchase unless otherwise noted.  Return of the power tool to a MILWAUKEE 

factory Service Center location or MILWAUKEE Authorized Service Station, freight prepaid and insured, is required.  A copy of 

the proof of purchase should be included with the return product.  This warranty does not apply to damage that MILWAUKEE 

determines to be from repairs made or attempted by anyone other than MILWAUKEE authorized personnel, misuse, alterations, 

abuse, normal wear and tear, lack of maintenance, or accidents.

*The warranty period for, Job Site Radios, M12™ Power Port and Trade Titan™ Industrial Work Carts is one (1) year from the 

date of purchase.  The warranty period for a LED Work Light and LEDUpgrade Bulb is a limited LIFETIME warranty to the original 

purchaser only, if during normal use the LED bulb fails the Work Light or Upgrade Bulb will be replaced free of charge.

*This warranty does not cover Air Nailers & Stapler, Airless Paint Sprayer, Cordless Battery Packs, Gasoline Driven Portable 

Power Generators, Hand Tools, Hoist – Electric, Lever & Hand Chain, M12™ Heated Jackets, Reconditioned product and Test 

& Measurement products.  There are separate and distinct warranties available for these products.

Warranty Registration is not necessary to obtain the applicable warranty on a MILWAUKEE power tool product.  The manu-

facturing date of the product will be used to determine the warranty period if no proof of purchase is provided at the time 

warranty service is requested.

ACCEPTANCE OF THE EXCLUSIVE REPAIR AND REPLACEMENT REMEDIES DESCRIBED HEREIN IS A CONDITION OF 

THE CONTRACT FOR THE PURCHASE OF EVERY MILWAUKEE PRODUCT.  IF YOU DO NOT AGREE TO THIS CONDITION, 

YOU SHOULD NOT PURCHASE THE PRODUCT.  IN NO EVENT SHALL MILWAUKEE BE LIABLE FOR ANY INCIDENTAL, 

SPECIAL, CONSEQUENTIAL OR PUNITIVE DAMAGES, OR FOR ANY COSTS, ATTORNEY FEES, EXPENSES, LOSSES 

OR DELAYS ALLEGED TO BE AS A CONSEQUENCE OF ANY DAMAGE TO, FAILURE OF, OR DEFECT IN ANY PRODUCT 

INCLUDING, BUT NOT LIMITED TO, ANY CLAIMS FOR LOSS OF PROFITS.  SOME STATES DO NOT ALLOW THE EXCLU-

SION OR LIMITATION OF INCIDENTAL OR CONSEQUENTIAL DAMAGES, SO THE ABOVE LIMITATION OR EXCLUSION 

MAY NOT APPLY TO YOU.  THIS WARRANTY IS EXCLUSIVE AND IN LIEU OF ALL OTHER EXPRESS WARRANTIES, 

WRITTEN OR ORAL.  TO THE EXTENT PERMITTED BY LAW, MILWAUKEE DISCLAIMS ANY IMPLIED WARRANTIES, 

INCLUDING WITHOUT LIMITATION ANY IMPLIED WARRANTY OF MERCHANTABILITY OR FITNESS FOR A PARTICULAR 

USE OR PURPOSE; TO THE EXTENT SUCH DISCLAIMER IS NOT PERMITTED BY LAW, SUCH IMPLIED WARRANTIES 

ARE LIMITED TO THE DURATION OF THE APPLICABLE EXPRESS WARRANTY AS DESCRIBED ABOVE.  SOME STATES 

DO NOT ALLOW LIMITATIONS ON HOW LONG AN IMPLIED WARRANTY LASTS, SO THE ABOVE LIMITATION MAY NOT 

APPLY TO YOU, THIS WARRANTY GIVES YOU SPECIFIC LEGAL RIGHTS, AND YOU MAY ALSO HAVE OTHER RIGHTS 

WHICH VARY FROM STATE TO STATE.

This warranty applies to product sold in the U.S.A. and Canada only.

Please consult the ‘Service Center Search’ in the Parts & Service section of MILWAUKEE’s website www.milwaukeetool.com 

or call 1.800.SAWDUST (1.800.729.3878) to locate your nearest MILWAUKEE factory Service Center location.