Husqvarna PG530 用户手册

8 

- English

The machine can be divided into two main parts. These 
can be identifi ed as follows:

1. Chassis/Frame section – comprising handle bars,     

electrical cabinet, steel frame and wheels.

2. Head – comprising of motors, cover, grinding/satel-

lite/    planetary heads and internal components.

The machine has been manufactured to allow move-
ment between the chassis and head via the connection 
point at the lifting lugs and chassis pins. This move-
ment is important during the grinding process as it 
creates a “fl oating” effect for the head.

The fl oating gives the head a self-leveling effect, negat-
ing the need to adjust the height of the head as the 
machine passes over fl oor areas with different slopes 
or undulations. 

The control panel consists of a number of switches and 
dials giving 6 separate controls (see picture).

Power - This button, when depressed, will turn on 
power supply to the unit when the EMERGENCY 
STOP button has been released.

Emergency Stop - When pushed will immediately 
shut down machine by totally stopping power supply to 
drives/ frequency converters in electrical cabinet.

Disc Speed - Speed control for grinding heads and 
planetary head.

Fwd/Rev (Red) - Direction control for grinding heads 
and planetary head.

Reset - Will clear fault function/error message on drive/ 
frequency converter (located in electrical cabinet) in 
case of fault occurring.

Stop/Run - To start or stop machine during normal 
operation.

It is important to use the STOP/RUN switch 
to control the running of the machine, not 
the EMERGENCY STOP button. Each time 
the EMERGENCY STOP button is pressed 
it shuts down the drive/frequency converter. 
Frequently powering up and down of the 
drive/frequency converter will reduce the life 
span of the drive/ frequency converter.

Planetary head and grinding heads are set 
to both turn in the same direction (i.e. both in 
clockwise rotation or both in counter-clock-
wise rotation).

Clockwise rotation of speed control will in-
crease speed of planetary head and grinding 
heads.