Euro-Pro V1504C 用户手册

If the suction opening in the unit or the hose is BLOCKED, switch off 
the vacuum cleaner and remove the blocking substance before you 
start the unit again.

2. Before inserting the power plug into 

the wall outlet, make sure that your 
hands are dry.

3. DO NOT vacuum liquids.

1.

DO NOT operate the vacuum cleaner 
close to heaters or radiators.

4. Keep hair, loose clothing, fingers, 

feet and all parts of body away from 
openings, rotating beater brush and 
other moving parts. 

6.

DO NOT pick up anything that is 
burning or smoking such as 
cigarettes, matches or hot ashes.

7.

DO NOT run appliance over 
power cord.

5.

When pulling out the power plug 
from the wall outlet, pull the 
plug not the power cord.

8.

DO NOT use without dust cup 
filter or filters in place.

9.

Before you start vacuuming, 
make sure to remove large or 
sharp objects that might 
damage the vacuum.

Avoid leaving the vacuum 

turned on in one place for an extended 
period of time as this may damage the 
carpet.
When using the vacuum cleaner, 
remove the power cord from the holders, 
clip the power cord to the power cord 
hook and ensure that the rest of the 
power cord doesn’t get in the way of the 
power nozzle when vacuuming. 

: Always ensure that the 

vacuum cleaner is turned off before 
unplugging and plugging in.
1. Plug in the vacuum and press the 

On/Off pedal.

2. Depress the handle release pedal to 

release the handle. (Fig. 3)

: When using the attachments, 

place the vacuum in the upright position. 

This vacuum cleaner is equipped with a 
convenient cord storage feature.  The 
power cord winds around the two cord 
holders at the side of the unit.  The top 
cord holder has a quick cord release 
feature.  Turn the top cord holder to the 
left or the right 180° to easily remove 
the power cord. (Fig. 2)
To wind the power cord, make sure the 
quick release cord 
holder is in the upright 
position and wind the 
cord clockwise around 
the two cord holders. 

: Wrapping the 

cord with excessive 
tension could damage 
the cord.

Always remove the power 

plug from the wall outlet before 
assembling, installing or removing 
accessories or before performing any 
maintenance or trouble shooting.

1. Lift the handle locking lever. (Fig. 1) 
2. Insert the handle as far as it will go 

into the opening in the top of the main 
body.  Make sure that the handle fits 
correctly into the opening.   

3. Press the handle locking lever back 

down to lock the handle into place.