Cecilware VAE-J1 用户手册

espresso coffee machine  -  instructions for the user

10

  -  english

R

It is necessary to have a coffee grinder with a dosing unit to grind coffee every day.
Grinding and dosing of coffee must be performed according to the instructions of the ma-
nufacturer of the coffee grinder. Please observe also the following:
•  In order to get a nice espresso, do not store large amounts of coffee beans. Also check 

the expiry date!

•  Never grind large amounts of coffee!
•  Do not purchase ground coffee as it may lose its fragrance before soon! If necessary, 

purchase ground coffee only in vacuumed packages.

•  Fill the piston with 1 portion of ground coffee (about 6 ~ 7 grams) and press it with 

the special pressing appliance.

•  Fix the handle of the piston to the brewing group. Do not tighten too hard to avoid 

damaging the thread.

•  For the same reason it is good to clean the edges of the filter holder before fixing the 

handle to the socket of the brewing group.

•  Follow the instructions provided by the manufacturer of the grinder-doser.

•   Turn the switch (A) round to position 1;
•    Open the gas cock (B) placed on the network; 
•    Keep knob (C) pressed while simultaneously pressing the ON button (D). 

When the flame is lit, keep knob (C) pressed for a few seconds for the 
thermocouple to warm up;

•  Check for the ignition of the flame, through the small window (E);   
•  Wait for the exercise pressure indicated on the gauge to reach the work 

value 1-1,2 bar.

•   Proceed as above “GAS HEATING”;
•    After having checked the flame ignition rotate the switch  (A) to position 2. In this way the resistance of the boiler is fed and the exercise 

pressure will be reached in a shorter amount of time;

•  Wait for the exercise pressure indicated on the gauge to reach the work value 1-1,2 bar.