Cecilware VAE-J1 用户手册

下载
页码 24
english  -  
11
R
espresso coffee machine  -  instructions for the user
WARNING
NEVER carry out the above-described operations wihout the coffee in the fi lter or without the fi lter-holder assembled in the 
group; the sudden return of the lever upwards can damage the appliance and injure people.
The time of delivery depends on the grinding and the quantity of coffee in the fi lter holder.
•  put the coffee cup under the dispensing spout;
•  press the desired dose key: the coffee starts pouring and can be stopped using the same push-button, 
when the desired amount of coffee has been delivered.
STOP
PROG.
Phase 1
Lowering the lever.
Phase 2
Pre-infusion for
3÷5 seconds.
Phase 3
Release of lever 
and delivery
of the coffee.
Dispensing coffee
•  put the coffee cup under the dispensing spout;
•  press the desired dose key:
 
wait for dispensing to finish (LED comes on);
•  to stop coffee delivery in advance, press the delivery key again or press the 
STOP key;
•  if the push button panel malfunctions or is locked, use the manual switch.
WARNING
The programming of every dose must be done with ground coffee and not with  previously used grounds.
•  put the coffee cup under the dispensing spout;
•  pull the lever all the way down;
•  wait briefly (3 to 5 seconds);
•  raise the lever until you encounter some resistance, then release it;
•  wait for dispensing to finish.
Programming
•  put the coffee cup under the dispensing spout.
•  press the PROG/STOP key for at least 5 seconds until all dose key LED are on.
•  press the desired dose key.
•  to confirm the dose press the dose key or the PROG/STOP key again.
•  repeat this operation for the other dose keys.
•  programming will be terminated automatically after a few seconds.