Nesco FG-400PR 用户手册

3

1.  Carefully unpack unit and examine all packaging to make sure all parts are included 

(See page 2)

2.  Clean all parts prior to using.

3.  Place unit on a flat stable surface.

4.  Make sure Switch is “OFF” (O) 

and power cord unplugged before 

assembling.

5.  Turn Locking Screw counter-clockwise 

several turns. Insert Grinder Head into 

Base opening until seated and tighten 

Locking Screw.

6.  Insert Feed Screw into Grinder Head, 

long end spindle first. Turn slightly until 

fully set in Grinder Head.

7.  Position Cutting Blade (cut edge facing outward to plate) onto Feed Screw. Make 

sure blade is seated over ‘square’ shoulder of Feed Screw or meat will not grind 

properly and Cutting Plate may be damaged.

8.  Place desired Cutting Plate over end of Feed Screw and against Blade. NOTE: 

Make sure “notch’ is aligned with ‘key’ 

in Grinder Head and seated against 

Blade.

9.  Thread Ring Nut on Grinder Head 

and turn gently until tight. Use Ring 

Nut  Wrench to loosen Nut after use if 

needed. 

10.  Place Food Hopper on top of 

Grinder Head.

11. Plug into 120 V outlet and you are 

ready to begin grinding.

•  With your own NESCO Professional Food Grinder, you control the ingredients. 

You control the amount of fats, salts and other additives, for a healthier diet. Chunky 

sandwich spreads, savory appetizers, hearty soups, relishes, homemade sausage, 

other meat dishes. . . even cakes are so easy to make.

•  You can make sausages out of any foods. Most butcher shops offer casings, 

which you purchase fresh, just before you are ready to grind.

•  Your NESCO Food Grinder is intended for processing relatively small quantities. 

Meat needs to be cut into relatively small chunks and gristle should be removed or 

it will likely clog the Feed Screw assembly. If grinder clogs, you can easily clear the 

Feed tube by pressing the REVERSE switch button.