Nesco FG-400PR 用户手册

5

1.  Always unplug unit when not in use, before inserting or removing parts and 

before cleaning.

2.  NEVER immerse Base unit in water or other liquids. Wipe Base with damp 

cloth and mild detergent. Do not use harsh or abrasive cleaners on Base as it 
could damage the finish.

3.  Wash all parts, except Base, in hot soapy water, rinse and set aside to dry. 

Use care when handling Cutting Blade. NOTE: REMOVABLE PARTS ARE 
NOT DISHWASHER SAFE. Dishwasher detergents may cause pitting and 
corrosion. Always wash by hand in soapy water.

4.  The Blade and Cutting Plates should be coated with cooking oil after washing 

and drying. Wrap in grease-proof paper or plastic bag to prevent corrosion 
(rust).

5.  Store appliance in a dry place.

6.  Any other servicing should be performed by an authorized service personnel.

During extended periods of use, fats from meats can build up inside the grinding 
head causing motor to strain and slow. If this happens turn off grinder and unplug 
cord from outlet. Disassemble and clean grinding head and feed screw.
Fine Cutting Plate - Use for finely ground texture, such as spreads, baby food or 
hamburger.
Medium Cutting Plate - Use for ground meat in soups or relishes
Course Cutting Plate - Use for coarsely ground texture, such as nuts, vegetables 
or ground meat for chili.
Raw Meat and Fish - These items will have a minimum loss of juices if thoroughly 
chilled before grinding. When grinding larger quantities, fats can build up inside 
the Grinder Head. If this occurs, disassemble and wash parts in soapy water, then 
reassemble. After grinding meat you can clean the Feed Screw by grinding a slice 
of bread.
Remove all bones, tough tendons, nut shells, etc. before grinding.
Nuts - Use the Course Cutting Plate and feed nuts into Grinder Head slowly. 
Whenever possible, alternate with other ingredients, such as dried fruits or 
vegetables.
Bread Crumbs - Best if using dry or toasted bread. Make sure all parts are free of 
moisture before starting.