KUHN RIKON 5100 用户手册
5100TK OPR 6270US R060106
26
MAINTENANCE
Always stop mixer, shut off the truck’s engine and remove the ignition key before servicing, repairing
or cleaning the machine.
or cleaning the machine.
If work must be done inside the mixer, put a protective cover over the auger knives to avoid injury.
The hopper floor and fighting may be slippery. Use caution when stepping on or standing inside
the machine.
The hopper floor and fighting may be slippery. Use caution when stepping on or standing inside
the machine.
Use safe shop procedures and exercise caution when working on the mixer!
LUBRICATION FOR 5144, 5156 AND 5168
It is extremely important that the following lubrication guide be followed:
For lubricating bearings, use a good quality multipurpose grease. Replace all damaged or missing grease
zerks immediately. Always clean zerks before using grease gun. Pump the grease in slowly until a slight bead
forms around the bearing seals. Once a month check lines and connections on grease banks for leaks.
For lubricating bearings, use a good quality multipurpose grease. Replace all damaged or missing grease
zerks immediately. Always clean zerks before using grease gun. Pump the grease in slowly until a slight bead
forms around the bearing seals. Once a month check lines and connections on grease banks for leaks.