Frymaster MSDU 用户手册

3 

transferring the oil to a disposal container.  It is equipped with 7" (178 mm) wheels and a foldable 
handle.  The pump is mounted at a convenient height that allows it to be operated from a standing 
position.  The height of the discharge pipe allows pumping directly into a standard 55-gallon drum. 
 
With the cover open, the top of the MSDU tank is 9¾ inches (248 mm) above the floor, permitting it 
to be positioned directly beneath the drains of McDonald’s fryers. (NOTE:  The tanks on MSDUs 
built before January 2004 are 11½ inches (292 mm) high.).  If using an MSDU built before January 
2004 the filter pan cover on BIPH14/MPH14 Series or BIPH52/MPH52 Series fryers must be 
removed to allow the unit to be positioned beneath the drain. 

 

Assembly of the unit is a four-step process: 

 

1.  Remove the two bolts (or lock pins if manufactured prior to May 2006) from the handle-mounting 

bracket and raise the handle to the upright position.  Reinstall the bolts (or lock pins) in the bracket.  

 
2.  Ensure the O-rings and the bottom 2 inches of the suction tube are lubricated with Accrolube 

with Teflon or an equivalent light oil or grease. 

 
3.  Turn the pump and suction tube upside down and carefully pour no more than one cup of cooking 

oil down the tube.  Rotate the pump handle slowly three or four times to prime the pump. 

 

4.  Insert the suction tube through the pipe bracket on the handle and into the pickup tube on top of 

the reservoir.  Push down on the pump assembly and ensure the suction tube is fully seated. 

Operation 

 

 

1.  Turn the fryer off prior to draining into MSDU.  If so equipped, ensure the fryer drainpipe is 

firmly threaded into the frypot drain valve. 

 

2.  Open the cover, verify that the crumb screen and rubber gasket on the inside cover are in place, 

and position the unit so that the opening is directly under the frypot drainpipe. 

 

Cover Gasket

Crumb Tray