Sears EORD230 用户手册

27

To prevent electrical shock and/or personal injury, make 

•

certain that the oven and light bulb(s) are cool and that 

power to the oven has been turned off at the main power 

supply before replacing the light bulb(s).
Always make sure the lens covers are in place when using 

•

the oven(s). The lens covers protect the light bulbs from 

breakage caused by high oven temperatures or mechanical 

shock.
Replacing the lens cover without lining up the cut-out with 

•

the light socket will damage the light fixture.
Do not use a screwdriver to remove the lens.

•

Light bulb replacement is considered to be a homeowner 

maintenance operation. if the lights do not work, before 

replacing them, please consult the Problem Solution 

Guide on page 29.

Do not touch the replacement halogen light bulbs with 

your fingers. Halogen bulbs are sensitive to the oils 

from your hand. the oils from your hand will stick to 

the bulb and cause it to burn out faster than normal.

Care and Cleaning

To replace the light bulbs...

replace the light bulb only with Dacor part number 

1. 

100429. see the page 28 for ordering information.
turn off power to the oven at the circuit breaker panel 

2. 

or fuse box.
hold your hand under the lens for support and gently 

3. 

pry it loose using a spatula or table knife. pull the lens 

cover straight out.
grasp the old bulb and pull it straight out of the 

4. 

socket.
using a glove, insert the new bulb into the socket.

5. 

as you reinstall the lens cover, line up the cutout on 

6. 

the inside rim with the light socket. gently press it 

into its original position.
turn the power to the oven back on at the main power 

7. 

supply.
reset the clock (see page 8).

8. 

Light 

bulb

Light 

socket

cutout on inside 

rim of lens

Replacing the Light Bulbs