Roland 5100001499-01 用户手册
115
Various Other Settings
Various Other Settings
The process of preparing USB memory or floppy disks so that
they can be used with the ATELIER is called “initialization”
(formatting).
In certain cases, particularly with floppy disks, the media is
formatted for a specific type of device. If the media format
does not match the ATELIER’s, you will not be able to use that
media with the ATELIER.
they can be used with the ATELIER is called “initialization”
(formatting).
In certain cases, particularly with floppy disks, the media is
formatted for a specific type of device. If the media format
does not match the ATELIER’s, you will not be able to use that
media with the ATELIER.
1.
Connect the USB memory to the External
Memory connector
Memory connector
If you want to initialize a floppy disk, connect your
floppy disk drive (sold separately) to the External
Memory connector, and insert the floppy disk.
floppy disk drive (sold separately) to the External
Memory connector, and insert the floppy disk.
2.
Press the [Utility] button.
3.
Press the Menu [
] [
] buttons a number
of times to select “Media Utility.”
4.
Press the [Rec] button.
5.
Press the Menu [
] [
] buttons a number
of times to select “Format Media.”
fig.02-10.eps
6.
Press the [Rec] button.
The Format screen appears.
To cancel the procedure, press the [Reset] button.
7.
Press the [Rec] button to start formatting.
To return to the basic screen, press the [Utility] button.
Never attempt to remove the USB memory until formatting is
complete.
complete.
Formatting a USB Memory
(Format)
(Format)
NOTE
AT-75_e.book 115 ページ ２００８年８月２１日 木曜日 午前１０時９分