Roland 5100001499-01 用户手册

 

Connecting with External Devices

 

Connecting with External Devices

 

The following become possible once you connect a USB cable 
(available separately) between the USB connector located to 
the lower left of the ATELIER and the USB connector of your 
computer.

• You can use the ATELIER to play sounds from SMF music 

files played back with MIDI software.

• By exchanging MIDI data with sequencer software, you 

can save songs recorded with the ATELIER to your 
computer, and enjoy a variety of musical control and 
editing features.

Connect the ATELIER to your computer as shown below.

 

* Refer to the Roland website for system requirements. 

Roland website: http://www.roland.com/

 

Normally, you don’t need to install a driver in order to connect 
the ATELIER to your computer. However, if some problem 
occurs, or if the performance is poor, using the Roland 
original driver may solve the problem. 
Specify the USB driver you want to use, and then install the 
driver.
For details on downloading and installing the Roland original 
driver, refer to the Roland website.

Roland website: http://www.roland.com/

Specify the USB driver you want to use, and then install the
driver.

• To prevent malfunction and/or damage to speakers 

or other devices, always turn down the volume, and 
turn off the power on all devices before making any 
connections.

• Only MIDI data can be transmitted using USB.

• USB cables are not included. Consult your Roland 

dealer if you need to purchase.

• Turn on the power to the ATELIER before starting up 

MIDI applications on the computer. Do not turn the 
ATELIER on or off while any MIDI application is 
running.

AT-75_e.book 117 ページ ２００８年８月２１日　木曜日　午前１０時９分