ICOM IC-7000 用户手册

98

7

VOICE RECORDER FUNCTIONS

To transmit a message using a voice recorder, record
the desired message in advance as described below.

qSelect S-1.

wPush [F-1 VO] then [Z(

)] to select the

voice root menu.

• If the voice root menu appears, skip the pushing

Z(

)]. The voice starting menu can be

changed in the miscellaneous (others) set mode.

ePush [F-3 MIC] to select the voice memory

recording mode.

rPush [Y(

)] then rotate [DIAL] to adjust

the mic gain control so that the “REC LEVEL” in-
dicator reads within maximum.

• Speak into the microphone without pushing 

[PTT].

• Push

[F-4 DEF] to select the default mic gain.

• Push

Z(

)] to exit the mic gain adjustment

condition.

tPush [F-1 ≤≥] to select the desired memory chan-

nel, then push and hold 

[F-3 REC] for 1 sec. to

start recording.

• Speak into the microphone without pushing 

[PTT].

• Previously recorded contents are cleared.

yPush [F-3 REC] again to stop recording.

• Recording is automatically terminated when the total

time of recorded messages, T1–T4, becomes 90 sec.

uPush [Z(

)] twice to exit the voice mem-

ory screen.

[MENU/GRP]

[F-3]

[F-1]

■ Recording a message for transmit

DRecording

DConfirming/Erasing the recorded message

q Call up the voice memory recording mode as de-

scribed in steps 

q to e as shown above.

wPush [F-1 ≤≥] to select the desired memory chan-

nel, then push 

[F-2 PLY] to start playback.

• “

” appears.

ePush [F-2 PLY] again to stop playback, if desired.

rPush [Z(

)] twice to exit the voice mem-

ory mode

q Call up the voice memory recording mode as de-

scribed in steps 

q to e as shown above.

wPush [F-1 ≤≥] to select the desired memory chan-

nel to be erased, push 

[F-2 PLY] to start playback.

• “

” appears.

ePush and hold [F-4 CLR] for 1 sec. to erase the

contents.

rPush [Z(

)] twice to exit the voice mem-

ory mode.