ICOM IC-7000 用户手册
100
7
VOICE RECORDER FUNCTIONS
7
q Select S-1.
wPush [F-1 VO] to call up the voice recorder menu.
• If the receive voice memory channels screen appears,
push
[
Z(
MENU
/
GRP
)] then push [F-2 TX] to select the
transmit voice memory channel.
• If the voice root menu appears, push
[F-2 TX] to select
the transmit voice memory menu. The voice recorder
starting menu can be changed in the miscellaneous
(others) set mode.
starting menu can be changed in the miscellaneous
(others) set mode.
ePush [F-1 T1] — [F-4 T4] to transmit the con-
tents.
• “T1”– “T4” are highlighted while transmitting.
rPush the selected memory channel key, [F-1 T1]
—
[F-4 T4], again to stop, if desired.
tPush [Z(
MENU
/
GRP
)] twice to exit the voice mem-
ory screen.
For your information
When an external keypad is connected to the pin 3
and pin 7 of the
and pin 7 of the
[MIC] connecter, the recorded
message, T1–T4, can be transmitted without open-
ing the voice recorder set screen.
See page 137 for details.
ing the voice recorder set screen.
See page 137 for details.
[MENU/GRP] [F-2] [F-3] [F-4]
[F-1]
■ Sending a recorded message
q Call up the voice memory recording mode as de-
scribed in steps
q to w as above.
wPush [Y(
MENU
/
GRP
)] to select the voice memory
transmit level set mode.
ePush the desired memory channel key, [F-1 T1]–
[F-3 T3], momentarily to transmit the contents.
rRotate [DIAL] to adjust the transmit voice level.
• Push
[F-4 DEF] to select the default condition.
tPush [Z(
MENU
/
GRP
)] to return to the voice recorder
screen.
DTransmit level setting