ICOM IC-7000 用户手册
109
8
MEMORY OPERATION
■Frequency transferring
This is useful for transferring programmed contents to
VFO.
VFO.
qSelect the menu M-2.
• Push and hold
[MENU/GRP] for 1 sec. once or twice
to select the menu group M.
• Push
[MENU/GRP] momentarily one or more times to
select the menu M-2.
wPush [F-4 V/M] momentarily to select the VFO
mode.
ePush [F-1 MEM] to display the memory channel
contents.
• Memory channel contents appear above the multi-func-
tion key indicator.
rPush [PBT/M-ch/RIT] momentarily to select the M-
ch/RIT function, if the twin PBT is selected.
•
[PBT/M-ch/RIT] indicator (Green) goes out.
tSelect a memory channel with [M-ch].
• “
” appears if the selected memory channel is a
blank channel (and does not have contents). In this
case transferring is not possible.
case transferring is not possible.
yPush [F-4 V/M] for 1 sec. to transfer the frequency
and operating mode.
• Transferred frequency and operating mode appear in
the display.
[EXAMPLE]: Transferring contents of memory 16.
Operating frequency
Contents of memory 16
Contents of memory 16
Push for
1 sec.
V/M
: 21.320 MHz/USB (VFO)
: 14.020 MHz/CW
: 14.020 MHz/CW
[MENU/GRP] [F-1]
[PBT/M-ch/RIT] indicator
[PBT/M-ch/RIT] switch/[M-ch] (inner) control
[F-4]
DTransferring in VFO mode
The frequency and operating mode in a memory chan-
nel can be transferred to the VFO.
nel can be transferred to the VFO.
Frequency transferring can be performed in either VFO
mode or memory mode.
mode or memory mode.
Menu group selection
Push
[MENU/GRP] for 1 sec.
Selection from: M, S or G(Graphic)
Menu selection (Example: M)
Push
[MENU/GRP] momentarily.
Selection from: M-1, M-2 or M-3
Either
Y or Z
Either
Y
or
Z