ICOM IC-7000 用户手册

110

8

MEMORY OPERATION

This is useful for transferring frequency and operat-
ing mode while operating in memory mode.

When you have changed the frequency or operat-
ing mode in the selected memory channel.

• Displayed frequency and mode are transferred.
• Programmed frequency and mode in the memory

channel are not transferred, and they remain in
the memory channel.

qPush [PBT/M-ch/RIT] momentarily to select the M-

ch/RIT function, if the twin PBT is selected.

•

[PBT/M-ch/RIT] indicator (Green) goes out.

wSelect the menu M-2.

• Push and hold 

[MENU/GRP] for 1 sec. once or twice

to select the menu group M.

• Push

[MENU/GRP] momentarily one or more times to

select the menu M-2.

ePush [F-4 V/M] momentarily to select the memory

mode.

rRotate [M-ch] to select the memory channel to be

transferred.

• “

” appears if the selected memory channel is a

blank channel (and does not have contents). In this
case transferring is not possible.

tPush [F-4 V/M] for 1 sec. to transfer the frequency

and operating mode.

• Displayed frequency and operating mode are trans-

ferred to the VFO.

yPush [F-4 V/M] momentarily to select the VFO

mode.

[MENU/GRP]

[PBT/M-ch/RIT] indicator

[PBT/M-ch/RIT] switch/[M-ch] (inner) control

[F-4]

DTransferring in memory mode