ICOM IC-7000 用户手册

49

4

RECEIVE AND TRANSMIT

This set mode is used to set the memory keyer repeat
time, dash weight, paddle specifications, keyer type,
etc.

qSelect CW mode with [MODE].

wSelect S-1.

ePush [F-2 KEY] then [Z(

)] to select the

keyer root menu.

rPush [F-4 SET] to enter the keyer set menu.

tPush [F-1 ≤] or [F-2 ≥] to select the desired set

item.

• Push

[F-4 DEF] for 1 sec. to select the default condi-

tion or value.

yPush [Z(

)] twice to exit the keyer set

menu and return to normal CW mode indication.

• Push and hold 

[MENU/GRP] for 1 sec. once or twice

to select the menu group S.

• Push

[MENU/GRP] momentarily one or more times to

select the menu S-1.

[MODE]

[MENU/GRP]

[F-1]

[F-2] [F-3] [F-4]

DKeyer set mode

1 Keyer Repeat Time

When sending CW using the repeat timer, this item
sets the time between transmission.

• 1 to 60 sec. in 1 sec. steps can be selected. 
• Push

[F-4 DEF] for 1 sec. to select a default setting. 

(default: 2 sec.)

2 Dot/Dash Ratio

This item sets the dot/dash ratio.

• 1 : 1 : 2.8 to 1 : 1 : 4.5 can be set.
• Check the ratio with side tone in CW mode.
• Push

[F-4 DEF] for 1 sec. to select a default ratio of

1 : 1 : 3.0.

Keying weight example: Morse code “K”

DASH

Weight setting:
1:1:3 (default)

Weight setting:
Adjusted

DASH

DOT (Fixed*)

Adjustable range

SPACE (Fixed*)

*SPACE and DOT length can be adjusted with 

“Key Speed” only in the quick set mode.