ICOM IC-7000 用户手册
■Operating RTTY (FSK)
When using your RTTY terminal or TNC, consult the
manual that comes with the RTTY terminal or TNC.
manual that comes with the RTTY terminal or TNC.
qPush [Y(
BAND
)]/[
Z(
BAND
)] to select the desired
band or push a band key on the HM-151.
wPush [MODE] momentarily to select RTTY mode.
• After RTTY mode is selected, push
[MODE] for 1 sec.
to toggle between RTTY and RTTY-R modes.
eDisplay the RTTY decoder screen.
• Push
[F-2 DEC] to display the Baudot decoder screen.
rRotate [DIAL] to simultaneously tune a desired sig-
nal.
• Use
[F-2 1/4] in the M-3 display when critical setting
is required.
• S-meter indicates received signal strength when signal
is received.
• If the received signal cannot be demodulated, try se-
lecting RTTY-R mode (or RTTY mode).
tTransmit a SEND signal from your TNC.
•
[TX] indicator lights red.
• The Po meter indicates transmitted RTTY signal
strength.
yOperate the connected PC or TNC (TU) to trans-
mit RTTY (FSK) signals.
“RTTY” or “RTTY-R” appears
[
Y]
[
Z]
[DIAL]
[MODE]
[AF]
[TX] indicator
[MENU/GRP]
[F-2]
• Push and hold
[MENU/GRP] for 1 sec. once or twice
to select the menu group S.
• Push
[MENU/GRP] momentarily one or more times to
select the menu S-1.
51
4
RECEIVE AND TRANSMIT