ICOM IC-7000 用户手册

52

4

RECEIVE AND TRANSMIT

• Preamp and attenuator (p. 74)

➥ Push [P.AMP/ATT] momentarily to turn the pre-

amp ON or OFF.

• “

” appears when the preamp is set to ON.

➥ Push [P.AMP/ATT] for 1 sec. to turn the attenua-

tor ON.

• Push

[P.AMP/ATT] momentarily to turn the attenuator

OFF.

• “

” appears when the attenuator is set to ON.

• Twin PBT (passband tuning) (p. 79)

➥ Push [PBT/M-ch/RIT] (switch) momentarily once

or twice to select the twin PBT ON or OFF (M-ch
RIT).

• PBT indicator lights green when the twin PBT is se-

lected.

➥ Rotate [PBT/M-ch/RIT] (controls–inner/outer).

• Push

)] to clear the settings.

• AGC (auto gain control) (p. 76)

➥ While “M-3” is selected, push [F-3 AGC] momen-

tarily one or more times to select AGC fast, AGC
middle and AGC slow.

• “

,” “

” and “

” appears when the

fast time constant, middle time constant and slow
time constant is selected, respectively.

➥ While “M-3” is selected, push [F-3 AGC] for 1

sec. to enter the AGC set mode.

• Push

[F-2 FAST], [F-3 MID] or [F-4 SLOW] to select

the time constant, then rotate 

[DIAL] to adjust the time

constant.

• Noise blanker (p. 80)

➥ Push [NB/ADJ] to turn the noise blanker ON and

OFF.

• “

” appears when the noise blanker is set to ON.

➥ Push [NB/ADJ] for 1 sec. to enter the noise

blanker set mode, then rotate 

[DIAL] to adjust the

threshold level, or noise pulse width.

• DSP noise reduction (p. 81)

➥ Push [NR/LEV] to turn the DSP noise reduction

ON and OFF.

• “

” appears when the DSP noise reduction is set to

ON.

➥ Push [NR/LEV] for 1 sec. to enter the noise re-

duction level set mode, then rotate 

[DIAL] to ad-

just the DSP noise reduction level.

• Manual notch filter (pgs. 82, 83)

➥ Push [MNF/ADJ] to turn the manual notch filter

ON and OFF.

• “

” appears when the manual notch filter is set to

ON.

➥ Push [MNF/ADJ] for 1 sec. to enter the manual

notch filter set mode.

• Push

[F-2 NF1], [F-3 NF2] to select the notch filter,

push

[F-4 NW] to set the filter width, rotate [DIAL] to

set the attenuating frequency.

function (p. 32)

➥ While “M-3” is selected, push [F-2 1/4] to turn

the

1

⁄

4

function ON and OFF.

• “

” indicator appears when the function is activate.

• Push and hold 

[MENU/GRP] for 1 sec. once or twice

to select the menu group M.

• Push

[MENU/GRP] momentarily one or more times

to select the menu M-3.

DConvenient functions for receive