Multiquip C30HDG 用户手册

Transmitter does not 
function at all

LED status indicator not 
fl ashing.

LED indicator not lit when 
power ON/OFF switch is 
pressed.

Turn transmitter power 
switch ON. 

Weak dead battery, replace 
batteries.

Check orientation of 
batteries.

Make sure transmitter has 
be matched (paired) to 
receiver.

Receiver is not powered 
up.

Transmitter range is poor

LED indicator not lit when 
power ON/OFF switch is 
pressed

LED indicator lit when 
switch is pressed

Weak dead battery, replace 
batteries.

Check receiver antenna

Maintain line-of-sight
Avoid obstructions
Check for interference
Heavy rain reduces range

Transmitter works (RX LED 
in receiver comes on) but 
outputs do not operate

Check wiring.

Make sure output wires are 
not shorted to Ground

Verify load is wired 
correctly.