Kawasaki STX-15F 用户手册
ELECTRICAL SYSTEM 14-49
Kawasaki Smart Steering System
Steering Position Sensor and Magnet Removal
•
Remove the steering holder (see Steering Removal in
Steering chapter).
Steering chapter).
•
Remove or disconnect:
Steering Position Sensor Lead Connector [A]
Leads Clamp on Steering Holder
Steering Position Sensor Mounting Screws [B]
Steering Position Sensor [C]
Leads Clamp on Steering Holder
Steering Position Sensor Mounting Screws [B]
Steering Position Sensor [C]
•
Unscrew the mounting screw [A] and remove the magnet
[B].
[B].
Steering Position Sensor and Magnet Installation
•
Moving the steering shaft in the direction [A] and [B],
check the steering shaft for excessive play.
If necessary, adjust the steering shaft nut or replace the
bushings.
check the steering shaft for excessive play.
If necessary, adjust the steering shaft nut or replace the
bushings.
•
Apply a non-permanent locking agent to the steering
position sensor mounting screws and magnet mounting
screw.
position sensor mounting screws and magnet mounting
screw.
•
Install the steering position sensor [A] to the steering
holder and align the projection [B] on the magnet with the
hole [C] on the steering shaft plate.
holder and align the projection [B] on the magnet with the
hole [C] on the steering shaft plate.