Kawasaki STX-15F 用户手册
ELECTRICAL SYSTEM 14-51
Kawasaki Smart Steering System
Steering Position Sensor Input Voltage Inspection
•
Measure the input voltage to the steering position sensor.
NOTE
○
Be sure the battery is fully charged.
○
Connect a digital voltmeter [A] to the lead connector [B]
of the steering position sensor using the needle adapter
set [C].
of the steering position sensor using the needle adapter
set [C].
Special Tool - Needle Adapter Set: 57001-1457
Connections to Steering Position Sensor Connector
Meter (+) → R/W Terminal
Meter (–) → BK Terminal
Meter (–) → BK Terminal
○
Turn the ignition switch ON.
○
Center the handlebar in the straight-ahead position.
○
Measure the input voltage.
Steering Position Sensor Input Voltage
Standard: Battery Voltage
○
Turn the ignition switch OFF.
If the reading is good, inspect steering position sensor
output voltage.
If the reading is out of the standard, check the following.
If the reading is good, inspect steering position sensor
output voltage.
If the reading is out of the standard, check the following.
Battery Voltage
20 A Main Fuse
Power Source Wiring (see Steering Position Sensor Cir-
cuit)
20 A Main Fuse
Power Source Wiring (see Steering Position Sensor Cir-
cuit)