Procom PL600HYLA 用户手册

7

11.

install the No. #  4 log as indicated on the base

    (FIG.-9)

.

Fig. -9 Install the LOG  #4

12.

Install the No. #5 Log as indicated on the base log

(FIG. 10).

FIG. -10 Insatll the LOG  #5

Apply a mixture of liquid soap and water to all

joints. 

 Bubbles forming

show a leak.

Check all connections for leaks

immediately.

l

- Connect the ON/OFF gas valve of the appliance
to the incoming gas supply line. See Figure 10. -
- Make certain all gas connections are right.

       - Turn the ON/OFF valve at the appliance slowly
         to the “ON” position. Use a soap and water
        solution to test for leaks.

Fig. 11 Natural gas burner assembly

 Your campfire burener is build to operate with natural
gas or build for LP gas.
This appliance is lit a piezo ignitor, follow these instruc-
tions exactly when lighting the campfire. BEFORE
LIGHTING, smell arround the appliance the appliance
area for gas. Be sure to smell to next to the ground as
liquid propane gas heavier than air and will settle to the
ground.
 Follow adaptable lighting instructions. Apply soap solu-
tion to all joints. Bubbles forming indicates  a leak. Do
not use a match or an open flame to detect leak. Light
heater after ensuring that no gas leak exists.