Novatel OM-20000041 用户手册
C
Commands Summary
MiLLennium GPSCard Software Version 4.50 Command Descriptions Manual Rev 1
123
SETDGPSID
This command is used to enter a station
ID
. Once set, the receiver will only accept differential corrections from a
station whose
ID
matches the set station
ID
. It is typically used when a station has data links containing
RTCM
or
RTCA
messages from several stations. By entering a specific station
ID
, the operator can select which station to
listen to. Having set a station
ID
, incoming,
RTCM
,
RTCMA
,
RTCA
,
RTCAA
, and
RTCAB
messages will be received
from only that station. When a valid station
ID
is entered, an improved data synchronization algorithm will be used.
It is recommended to always set the station
ID
. This command can also be used to set the station
ID
for a GPSCard
reference station. See
FIX
POSITION
4th parameter (station ID).
Syntax:
Example 1:
SETDGPSID 1023
Example 2:
SETDGPSID “abcd”
SETDGPSID
station ID #
SETDGPSID
all
Syntax
Range Value
Description
Default
SETDGPSID
Command
station ID #
0 - 1023
or
“xxxx”
or
0 - 31
or
all
Reference station ID number for RTCM
Reference station name for RTCA where ”xxxx” are four
alphanumeric characters, entered between double quotes
alphanumeric characters, entered between double quotes
Reference station ID number for CMR
Accepts differential corrections from any station
all