Pioneer VSX-AX5i-G 用户手册

下载
页码 120
Setting Up for Surround Sound
42
En
1 SPEAKER SETTING should be selected. 
If it isn’t use the 
 buttons to select 
it. Press the ENTER button.
The setup possibilities appear on your TV.
2 With the 
 buttons choose the 
speakers that you want to set. Press 
the ENTER button.
The setup possibilities appear on your TV.
3 Use the 
 buttons to choose the 
number (YES or NO, X1 or X2) and the 
size (LARGE or SMALL) for each set of 
speakers. Press ENTER.
PLUS is also a possibility for the SUBWOOFER.
4 Repeat steps 2 and 3 for all speakers 
channels.
5 Use the 
 buttons to select EXIT 
and press ENTER.
Next, proceed to CHANNEL LEVEL below. 
If you want to change a setting before proceeding 
start over from step 1.
Memo:
If you have a subwoofer and like lots of bass, it may seem 
logical to select LARGE for your front speakers and leave the 
subwoofer selected. This may not, however, yield the best 
bass results. Depending on the size and shape of your room 
you may actually experience a decrease in the amount of 
bass due to what is called low frequency cancellations. If you 
have a subwoofer, listen to the bass response with the front 
speakers set to LARGE and SMALL alternately and let your 
ears judge which sounds best.
The safest option is to route all the bass sounds to the 
subwoofer by selecting SMALL for the front speakers.
1
2
3
1-5
VSX-AX5i.book  Page 42  Friday, May 23, 2003  6:33 PM