Sony 4-144-907-43(1) 用户手册
109
GB
D:\NORM'S JOB\SONY HA\SO0056\STR-DA3500ES\CEL VERSION\GB\4144907431\01GB-
STRDA3500ESUC\090OTH_GB.fm
STRDA3500ESUC\090OTH_GB.fm
masterpage: Right
STR-DA3500ES
4-144-907-43(1)
4-144-907-43(1)
Other Oper
ations
2
Press
V/v repeatedly to select the item,
then press
.
3
Select “SAVE EXIT” in step 2.
The measurement results are saved.
The measurement results are saved.
4
Press
V/v repeatedly to select the Auto
Calibration type, then press
.
Tip
The size of a speaker (LARGE/SMALL) is
determined by the low frequency characteristics.
The measurement results may vary, depending on
the position of the optimizer microphone and
speakers, and the shape of the room. It is
recommended that you follow the measurement
results. However, you can change those settings in
the Speaker settings menu. Save the measurement
results first, then try to change the settings if you
want.
determined by the low frequency characteristics.
The measurement results may vary, depending on
the position of the optimizer microphone and
speakers, and the shape of the room. It is
recommended that you follow the measurement
results. However, you can change those settings in
the Speaker settings menu. Save the measurement
results first, then try to change the settings if you
want.
When you select “PHASE INFO.”
You can check the phase of each speaker (in
phase/out of phase).
phase/out of phase).
Press
V/v repeatedly to select a speaker,
then press
to return to step 2 in “To
*
xxx represent a speaker channel.
FL
Front Left
FR
Front Right
CNT
Center
SL
Surround Left
SR
Surround Right
SB
Surround Back
SBL
Surround Back Left
SBR
Surround Back Right
SW
Subwoofer
Tip
Depending on the position of the subwoofer, the
measurement results for polarity may vary.
However, there will be no problems even if you
continue to use the receiver with that value.
measurement results for polarity may vary.
However, there will be no problems even if you
continue to use the receiver with that value.
Item
Explanation
RETRY
Performs the Auto Calibration
again.
again.
SAVE EXIT
Saves the measurement
results and exits the setting
process.
results and exits the setting
process.
WARN CHECK Displays a warning
concerning the measurement
results. See “Message list
after Auto Calibration
measurement” (page 49).
results. See “Message list
after Auto Calibration
measurement” (page 49).
PHASE INFO.
Displays the phase of each
speaker (in phase/out of
phase). See “When you select
“PHASE INFO.”” (page 109).
speaker (in phase/out of
phase). See “When you select
“PHASE INFO.”” (page 109).
DIST. INFO.
Displays the measurement
result for speaker distance.
result for speaker distance.
LEVEL INFO.
Displays the measurement
result for speaker level.
result for speaker level.
EXIT
Exits the setting process
without saving the
measurement results.
without saving the
measurement results.
Auto
Calibration
type
Calibration
type
Explanation
FULL FLAT
Makes the measurement of
frequency from each speaker
flat.
frequency from each speaker
flat.
ENGINEER
Sets the frequency
characteristics to a set that
matches that of the Sony
listening room standard.
characteristics to a set that
matches that of the Sony
listening room standard.
FRONT REF
Adjusts the characteristics of
all the speakers to match the
characteristics of the front
speaker.
all the speakers to match the
characteristics of the front
speaker.
OFF
Set the Auto Calibration EQ
to off.
to off.
Display
window
window
Explanation
xxx*: IN
The speaker is in phase.
xxx*: OUT
The speaker is out of phase. The
“+” and “–” terminals of the
speaker may be connected the
other way around. However,
depending on the speakers,
“OUT” appears on the display
window even though the speakers
are connected properly. This is
because of the speakers’
specifications. In this case, you
can continue to use the receiver.
“+” and “–” terminals of the
speaker may be connected the
other way around. However,
depending on the speakers,
“OUT” appears on the display
window even though the speakers
are connected properly. This is
because of the speakers’
specifications. In this case, you
can continue to use the receiver.
xxx* – – –
No speakers are connected.