InSinkErator 14481 用户手册

PERSONAL INJURY

.•.For.safe.operation,.The.minimum.required.distance

. from.the.table.top.or.trough.to.the.mounting.flange.

is.6.inches.for.standard.body.disposers..

(as.specified.by.UL)..See.Figure.5.

.•.Moving.shredder.parts.may.cause.serious.injury.if.

a.hopper.or.cone.is.not.properly.installed.

DISPOSER.MOUNTING

The.disposer.can.be.mounted.to.the.sink.or.trough
using.a.standard.InSinkErator.mount.or.an..
InSinkErator.mounting.adaptor.

NOTE: The InSinkErator #5 Sink Flange can not be
used with the Waste Xpress system.

NOTE: InSinkErator must approve attachment to a
non-InSinkErator sink.

PROPERTY DAMAGE

To.avoid.excess.vibration,.InSinkErator.

recommends.a.minimum.countertop.thickness..

of.16.gage.stainless.steel.

6" min.

(152.4 mm min.)

Figure 5.

CLEAN.THE.DRAIN.LINE

With.a.drain.line.auger,.clear.away.all.hardened.waste
material.in.the.horizontal.drainpipe.running.from.the
drain.trap.to.the.main.waste.line.

Installing Disposer