Philips LFF6050/GBB 用户手册

- 35 -

This menu allows you to print out received faxes 
automatically adjusting them to the page format. 
Received faxes are then automatically reduced or 
enlarged to fit the page format which is used on the 
machine.

To turn adjust to page mode on:

1 Press  , enter 245 using the keypad.
2 Select the option ON or OFF and confirm with OK.

3 To exit this menu, press 

.

This menu allows you to reduce received faxes for 
printing. This adjustment can be automatic or manual.

Automatic mode:
This mode automatically resizes received faxes.

To set automatic mode:

1 Press  , enter 246 using the keypad.
2 Select AUTOMATIC and confirm with OK.

3 To exit this menu, press 

.

Manual mode:
The machine proposes a 70 to 100 % reduction. Outside 
these values, the machine beeps for error. This fixed 
reduction will be used when printing received documents, 
regardless of the used paper format.

To set the manual mode:

1 Press  , enter 246 using the keypad.
2 Select FIXED and confirm with OK.
3 Enter the reduction value (between 70 and 100) 

and confirm with OK.

4 To exit this menu, press 

.

As delivered your machine is preset by default. However, 
you may adjust it to meet your requirements by resetting 
the technical parameters.

To set the technical parameters:

1 Press  , enter 29 using the keypad.
2 Select the desired parameter and confirm with OK.

3 With the keys   or  , modify the parameter 

settings by following the table below and press OK.

Default value of the scan mode 
resolution for the documents to be 
transmitted.

Important: this parameter is by 
default activated on the US model 
and cannot be modified.

If this parameter is on, your header 
will appear on all documents sent 
to your subscribers with your 
name, number, date and number 
of pages.

Warning: If you send a fax from 
the document loader, the 
transmission header will not 
appear on the document your 
correspondent receives.

Transmission speed for outgoing 
documents.

 

For a quality telephone line 
(compatible, no echo), 
communications occur at 
maximum speed.

However, it may be necessary to 
restrict the transmission speed for 
some calls.

If this parameter is on, the on-line 
echo will be reduced during long 
distance calls.

For some long distance calls 
(satellite), the on-line echo may 
disturb the call.

Choice between transmission 
speed displayed or number of the 
page in progress.

Choosing the printer standby 
delay: the printer will switch to 
standby after a delay (in minutes) 
of NON-operation or during the 
period of time of your choice.

Note: you can also access this 
parameter by pressing the 

 key from the idle screen.

If this parameter is on, all 
documents received by your fax 
will include the subscriber’s header 
with his/her name, number (if 
available) fax print date and the 
page number.