Philips LFF6050/GBB 用户手册

- 36 -

Press  , enter 51 using the keypad.

The printing of the functions guide starts.

The incoming and outgoing logs list the last 30 
transmissions (incoming and outgoing) made by your 
machine.

An automatic print out will take place after every 30 
transmissions. However, you may request a print out at 
any time.

Each log (incoming or outgoing) contains a table with the 
following information:
• date and time of the incoming or outgoing document,
• subscriber’s number or E-mail address,
• transmission mode (Normal, Fine, SFine or Photo),
• number of pages sent or received,
• call duration,
• incoming or outgoing results: noted CORRECT if 

properly transmitted,

 

 

information codes for special calls (polling, manual 
subscribers, etc.)

• reason for call error (example: your subscriber does 

not answer).

Press  , enter 54 using the keypad.

The printing of the logs starts. The incoming and outgoing 
logs are printed on the same page.

Transmission speed for incoming 
documents.

 

For a quality telephone line 
(compatible, no echo), 
communications occur at 
maximum speed.

However, it may be necessary to 
restrict the transmission speed for 
some calls.

Number of rings to automatically 
start your machine.

The Discard Size parameter only 
defines the printing of received 
faxes. The number of lines of a 
document can be too high for the 
printing paper format. This 
parameter defines the threshold 
beyond which the extra lines are 
printed on a second page. Below 
this threshold, extras lines are 
deleted.

If you choose ON, the threshold is 
set on 3 centimeters.

If you choose OFF, the threshold is 
set on 1 centimeter.

This parameter helps correct the 
calls made on disturbed telephone 
lines. It is used when the lines are 
weak or too noisy. Transmission 
times may be longer.

This parameter lets you choose 
between a complex impedance 
and a 600 Ohm impedance, 
depending on the telephone 
network your terminal is connected 
to.

Makes printing lighter to save toner 
cartridge ink.

RAW network print port 
connection.

Time-out before document being 
printed is deleted following a print 
error in PC print mode.

Wait time-out for data from PC 
before the task is deleted in PC 
print.

Page format change. This 
parameter allows you to print a 
LETTER format document on A4 
pages using the LETTER/A4 
setting.

Number of WEP keys allowed 
(from 1 to 4).