Sony LF-X1 用户手册

F:\Joutou\#4090332_Sony_LF-X\4103221121up\4103221121\4103221121LF-
X1\00GB05C01-WW.fm

LocationFreeTV

4-103-221-12(1)

55

This section describes how to set up the NetAV 
server on the base station and the NetAV client on 
the monitor.

While you are away from home with your 
monitor, you can connect it to your base station 
via the Internet, enjoy TV, and control the VCR or 
the DVD player in your home. This is the 
“NetAV” function.
By connecting it to a public wireless access, you 
can enjoy NetAV at a cafe via the Internet. You 
can also enjoy NetAV at a hotel by connecting it 
to the Internet via wired LAN.

• To use NetAV, you must perform the following 

settings beforehand on the base station, router, and 
other peripheral devices. Without configuring the 
necessary settings, you will not be able to use the 
NetAV function when you take the monitor away 
from home.

• You cannot use NetAV when connected to the 

Internet via an analog phone line that uses a dial-up 
router.

Configuring the monitor settings allows you to 
connect to the Internet using the NetAV function 
from a wireless or wired LAN away from home. 
NetAV settings must be configured when 
connecting by either Wireless or Wired LAN. In 
addition, when connecting wirelessly you must 
configure [Wireless Monitor Settings], and when 
connecting by Wired LAN you must configure 
[Wired Monitor Settings].

• When using NetAV, the base station power must be 

turned on.

• You must set up NetAV in advance while you are at 

home and the monitor has a wireless connection to 
the base station (Home-Wireless mode). If you 
cannot connect to the base station in Home-Wireless 
mode while away from home, you cannot change the 
base station settings. 

z 

• NetAV transmits video via the Internet. Currently, 

we recommend the network throughput higher than 
300 kbps (both uploading and downloading). If the 
connection speed is too slow, the picture and sound 
may cut out or be affected by noise, etc.

• Because the monitor does not have a PPPoE 

function, you may need to configure the router 
settings when using the monitor at a location other 
than your home.

• If a firewall is set, you cannot use NetAV.

• Analog phone line using a dial-up router
• Cellular phones
Some other line types may not allow you to 
connect with NetAV because of restrictions 
imposed by Internet Service Providers (ISPs) or 
the connection devices in use.