Sony LF-X1 用户手册

F:\Joutou\#4090332_Sony_LF-X\4103221121up\4103221121\4103221121LF-
X1\00GB05C01-WW.fm

LocationFreeTV

4-103-221-12(1)

56

You need to select [Home-Wireless] mode on the 
[Monitor] window to prepare for the base station 
settings over the wireless connection.

The NetAV function allows you to enjoy movies 
and other media while away from home by 
accessing your base station via the Internet. It is 
necessary, therefore, to set your base station so it 
is accessible over the Internet.

To use NetAV function, enable the NetAV port on 
the base station, and set up so the base station is 
accessible by NetAV while away from home.

Open the [Settings] window and select [Base 
station].
The [Base station] window appears.

Select [NetAV Settings].
The [NetAV Settings] window appears.

[NetAV Settings] can only be selected when the 
monitor is set to Wireless Home mode. If you 
cannot select [NetAV Settings], check your 
monitor settings.

Select [Enable/Disable NetAV].
The [Enable/Disable NetAV] window 
appears.

Configure the necessary settings for each 
item and select [OK].

1

Select [Enable].

2

If necessary, change the port number of 
the NetAV server.

3

Select [OK].

z 

For [Port number for the NetAV], enter a number 
between 5021 and 5999.

Configure the following items while the base 
station and monitor are connected in Home-
Wireless mode.

The [NetAV Settings] window reappears.

Select [Back].
The [Base Station] window reappears.

Select [Settings], then select [Exit].

z 

When the base station is connected to the Internet 
through a router, the router must be set to port 
forwarding*. Refer to the “Port number for the 
NetAV” in the [Enable/Disable NetAV] window, and 
set access to the NetAV port to forward to the IP 
address of the base station (

1 This page).

* Some makers call it by different names such as port 

transfer or static IP masquerade.