Husqvarna 132R 用户手册

English

 – 13

CAUTION!  The guard extension shall always be fitted when 
using the trimmer head/plastic blades and combination 
guard. The guard extension shall always be removed when 
using the grass blade and combination guard.

Enter the guard extension guide in the slot of the combination 
guard. Then click the guard extension into position on the 
guard with the four quick-fasteners. 

The guard extension is removed easily using the spark plug 
spanner, see illustration.

1

Insert the tips of the blade into the grooves in the transport 
guard (A).

2

Wind the transport guard around the teeth of the blade, 
then clip the ends together (B).

•

132R: The blade guard (A) is fitted using 4 screws (L) as 
shown. CAUTION! Use the recommended blade guard. 
See the Technical data section.

133R: Hook the blade guard/combination guard (A) onto 
the fitting on the shaft and secure with the bolt (L).

142R: Fit the guard (A) to the gear housing using the 
support plate (M) and two screws (L).

CAUTION!  Ensure that the guard extension is removed. 
Use the recommended blade guard. See the Technical 
data section.

143R: Hook the blade guard/combination guard (A) onto 
the fitting on the shaft and secure with the bolt. CAUTION! 
Ensure that the guard extension is removed. Use the 
recommended blade guard. See the Technical data 
section.

•

Fit the drive disc (B) on the output shaft.

•

Turn the blade shaft until one of the holes in the drive disc 
aligns with the corresponding hole in the gear housing.

•

Insert the locking pin (C) in the hole to lock the shaft.

•

Place the blade (D), support cup (E) and support flange 
(F) on the output shaft.