Husqvarna 132R 用户手册

English

 – 15

•

Throttle cable should be paralleled to flexible shaft. In 
case of twisting, they should be restored by parallel.

•

Throttle cable should be adjusted under the bended 
flexible shaft.

1

Loosen the lock-nut (C) and adjust the cable adjuster 
sleeve (D) so the stop on the carburettor throttle cam just 
contacts the throttle stop and the cable position keep 1–2 
mm play between cable lug and slotted fittings when the 
throttle trigger is fully depressed.

2

When the throttle cable is adjusted correctly, tighten the 
locking nut (C).

At the front is an easily accessible, quick release. Use this if 
the engine catches fire or in any other emergency situation 
that requires you to free yourself from the machine and 
harness.

A well-adjusted harness and machine makes work much 
easier. Adjust the harness for the best working position. 
Tension the side straps so that the weight is evenly distributed 
across both shoulders.

Adjust the shoulder strap so that the cutting attachment is 
parallel to the ground.

Let the cutting attachment rest lightly on the ground. Adjust 
the position of the support hook to balance the clearing saw 
correctly.

1-2mm