Husqvarna W3613ETS 用户手册
15
WHEEL DRIVE BELT REPLACEMENT
WHEEL DRIVE BELT: If belts are worn or
damaged, wheels will not drive properly. To
replace either belt, proceed as follows:
WHEEL DRIVE BELT: If belts are worn or
damaged, wheels will not drive properly. To
replace either belt, proceed as follows:
1. Unhook brake linkage from brake band arm.
Located between the rear deck and the rear tire.
2. Unhook traction linkage from bellcrank. The
traction linkage connects the traction levers on
the handle to the bellcranks on each side of the
mower. The bellcranks are located behind the
rear tires.
3. Unhook spring from belt guard. Located on
the sides of the tank support.
4. Remove belt guard.
5. Loosen bellcrank pivot and belt guard mount-
ing bolts, slide spacers off of bolts to gain
clearance for belt removal.
6. Remove belt.
7. To replace belt reverse the procedure and
make any needed adjustments.
Located between the rear deck and the rear tire.
2. Unhook traction linkage from bellcrank. The
traction linkage connects the traction levers on
the handle to the bellcranks on each side of the
mower. The bellcranks are located behind the
rear tires.
3. Unhook spring from belt guard. Located on
the sides of the tank support.
4. Remove belt guard.
5. Loosen bellcrank pivot and belt guard mount-
ing bolts, slide spacers off of bolts to gain
clearance for belt removal.
6. Remove belt.
7. To replace belt reverse the procedure and
make any needed adjustments.
BLADE DRIVE BELT REPLACEMENT
(36" & 48" MOWERS)
BLADE DRIVE BELT: If the belt is worn or
damaged, blades will not drive properly. To
replace this belt, proceed as follows:
(36" & 48" MOWERS)
BLADE DRIVE BELT: If the belt is worn or
damaged, blades will not drive properly. To
replace this belt, proceed as follows:
1. Close fuel tank shut-off valve and remove
spark plug wire.
2. Remove the belt cover from the mower deck.
3. Loosen the snubber bolt on the engagement
idler so belt can be removed. The engagement
idler is located on the front deck towards the
rear. See figure 6 on page 11.
4. Raise the rear of mower and block up the
rear tires to gain access to the underside of rear
deck.
5. Remove the rear belt shield from the under-
side of rear deck.
6. Loosen the engine bolts with belt guides and
rotate them away from the engine pulley. Belt
guides can be seen in figures 4 and 5 on page
10.
7. Loosen the belt guides located around the
pulleys on the front deck. Belt guides are 5/16"
bolts and must be loosened to remove the belt.
8. Remove belt.
9. To replace belt - reverse the procedure and
make any needed adjustments to belt guides or
belt tension.
spark plug wire.
2. Remove the belt cover from the mower deck.
3. Loosen the snubber bolt on the engagement
idler so belt can be removed. The engagement
idler is located on the front deck towards the
rear. See figure 6 on page 11.
4. Raise the rear of mower and block up the
rear tires to gain access to the underside of rear
deck.
5. Remove the rear belt shield from the under-
side of rear deck.
6. Loosen the engine bolts with belt guides and
rotate them away from the engine pulley. Belt
guides can be seen in figures 4 and 5 on page
10.
7. Loosen the belt guides located around the
pulleys on the front deck. Belt guides are 5/16"
bolts and must be loosened to remove the belt.
8. Remove belt.
9. To replace belt - reverse the procedure and
make any needed adjustments to belt guides or
belt tension.
AUXILIARY BELT REPLACEMENT
(48" MOWERS)
(48" MOWERS)
1. Loosen the auxiliary belt adjusting rod. To
relieve tension on the belt. See figure 6 on page
11.
2. Remove belt guides from the center spindle.
3. Remove belt.
4. Reverse procedure for replacement. Adjust
belt to proper tension.
relieve tension on the belt. See figure 6 on page
11.
2. Remove belt guides from the center spindle.
3. Remove belt.
4. Reverse procedure for replacement. Adjust
belt to proper tension.
TRANSMISSION BELT REPLACEMENT
(36" & 48" MOWERS)
(36" & 48" MOWERS)
1. Blade drive belt must be removed from
engine pulley before transmission belt can be
removed. See blade drive replacement, use
steps 4, 5, and 6. Also see figures 4 and 5 on
page 10.
2. Loosen nut on the transmission idler pulley
and slide pulley in slot to relieve tension on belt.
3. Remove the belt from the transmission pulley
and the engine pulley.
4. Reverse the procedure for replacement.
engine pulley before transmission belt can be
removed. See blade drive replacement, use
steps 4, 5, and 6. Also see figures 4 and 5 on
page 10.
2. Loosen nut on the transmission idler pulley
and slide pulley in slot to relieve tension on belt.
3. Remove the belt from the transmission pulley
and the engine pulley.
4. Reverse the procedure for replacement.
WINTER STORAGE
To prepare your Husqvarna mower for winter
storage, perform the routine maintenance and
necessary adjustments and record the part
numbers of worn or broken parts so they may
be ordered and replaced before the next mow-
ing season. Use only authentic Husqvarna
replacement parts to insure proper fit and the
safety of your mower is maintained.
Treat the fuel in the tank with a fuel stabilizer
(such as STA-BIL). This will minimize the
formation of fuel gum deposits during storage.
Read and follow the mix ratio on the container.
Run the engine for at least 10 minutes after
adding the stabilizer to bring it into the carbure-
tor.
To prepare your Husqvarna mower for winter
storage, perform the routine maintenance and
necessary adjustments and record the part
numbers of worn or broken parts so they may
be ordered and replaced before the next mow-
ing season. Use only authentic Husqvarna
replacement parts to insure proper fit and the
safety of your mower is maintained.
Treat the fuel in the tank with a fuel stabilizer
(such as STA-BIL). This will minimize the
formation of fuel gum deposits during storage.
Read and follow the mix ratio on the container.
Run the engine for at least 10 minutes after
adding the stabilizer to bring it into the carbure-
tor.
These few tips will help make your mower ready
when needed for the next mowing season and
insure many years of dependable service.
when needed for the next mowing season and
insure many years of dependable service.