JVC GZ-E100 用户指南
SD Card
Cannot insert the SD card.
Make sure not to insert the SD card in the wrong direction.
Unable to copy to SD card.
To use SD cards that have been used on other devices, it is necessary to
format (initialize) the SD card using “FORMAT SD CARD” from media
settings.
Playback
Sound or video is interrupted.
Sometimes playback is interrupted at the connecting section between two
scenes. This is not a malfunction.
There is no sound.
Audio sound is not recorded for videos taken in “TIME-LAPSE
RECORDING”.
The same image is displayed for a long time.
Use a high speed SD card (Class 4 or higher).
Execute “FORMAT SD CARD” in the “MEDIA SETTINGS” menu. (All data
will be deleted.)
The motion is choppy.
Use a high speed SD card (Class 4 or higher).
Clean the terminals of the SD card with a dry cotton swab or something
similar.
Execute “FORMAT SD CARD” in the “MEDIA SETTINGS” menu. (All data
will be deleted.)
Verify the system requirements of your PC when using Everio MediaBrowser
4 to play back.
Cannot find a recorded file.
Cancel the date search function.
Select “PLAYBACK OTHER FILE” in the menu. (Video files that have
damaged management information can be played back.)
No date/time display.
Set “ON-SCREEN DISPLAY” in the menu accordingly.
Set “DISPLAY ON TV” in the menu to “ON”.
Images do not appear on the TV properly.
Disconnect the cable and connect again.
Turn off and on this unit again.
Images are projected vertically on the TV.
Set “VIDEO OUTPUT” in the “CONNECTION SETTINGS” menu to “4:3”.
Adjust the TV's screen accordingly.
The image displayed on TV is too small.
Set “VIDEO OUTPUT” in the “CONNECTION SETTINGS” menu to “16:9”.
When connected to the TV via the HDMI mini cable, proper
images and sounds are not output.
Images and sounds may not be output properly depending on the TV
connected. In such cases, perform the following operations.
A
A
Disconnect the HDMI mini cable and connect it again.
B
Turn off and on this unit again.
Troubleshooting
73