TallyGenicom 2440 用户指南
Set-Up mode
Special mode
4-6
Options with Pre-determined Values
For some options, you can choose among a limited set of pre-determined values. To se-
lect such a value:
lect such a value:
1
Repeatedly press the PARK/PRINT/
T
key or the TEAR/
S
key to position the
value you require.
2
Press the FF/LOAD/Micro Feed Up/
X
key to select the function. The printer
prints the first parameter.
3
Press the SEL/MENU key to select the desired value and to activate the
SAVE&EXIT position.
SAVE&EXIT position.
4
Press the SEL/MENU key again to save the new value and exit the Set-Up mode.
`
The printer exits the Set-Up mode and returns to the ready mode. The selected values
remain in effect until the next time they are changed.
remain in effect until the next time they are changed.
Example: Changing the Vertical Pitch
To become familiar with the Set-Up mode, try the following example. This example shows
how to change the vertical pitch in COMMON (PUSH TRAC) from 6 lines per inch to 8
lines per inch.
To become familiar with the Set-Up mode, try the following example. This example shows
how to change the vertical pitch in COMMON (PUSH TRAC) from 6 lines per inch to 8
lines per inch.
1
Enter the Set-Up mode: Turn the printer off and back on while pressing the SEL/
MENU key.
MENU key.
2
Select the COMMON (PUSH TRAC) function: Wait for the printer to stop print-
ing and press the PARK/PRINT/
ing and press the PARK/PRINT/
T
key five times to print the COMMON (PUSH
TRAC) function.
3
Press the FF/LOAD/Micro Feed Up/
X
key to print the PAPER SET parameter.
4
Press the PARK/PRINT/
T
key to print the LPI parameter.
5
Press the FF/LOAD/Micro Feed Up/
X
key to print the current LPI value (default:
6 LPI).
6
Change the vertical pitch from 6 to 8 lines per inch. Press the PARK/PRINT/
T
key once to position the 8 LPI. Press the SEL/MENU key to select 8 LPI.
7
Press the SEL/MENU key to select 8 LPI and to activate the SAVE&EXIT posi-
tion.
tion.
8
Press the SEL/MENU key again to save the new value and exit the Set-Up mode
and return to the Ready state. This setting remain in effect until the next time they are
changed.
and return to the Ready state. This setting remain in effect until the next time they are
changed.