Advantek Networks awr-11n-rt 用户指南

Enable:

Enable/Disable the LAN packet filter. Default setting is Disable.

Source IP:

The IP address of the LAN computer that will be denied access to the Internet.

You can also add a range of IP addresses.

Destination Port:

The single port or port range that will be denied to access. If no port is

specified, all ports will be denied access.

Protocol:

This is the protocol type that will be used with the Port that will be blocked.

Block:

You can block the IP address of the LAN computer always or by schedule.

Day:

If Block set to “by Schedule”, you need to determine which day(s) will be performed.

Time:

If Block set to “by Schedule”, you need to determine which time will be performed

Action:

Insert a new LAN packet filter or update a specified LAN packet filter.

[MAC Packet Filter]

Use MAC Filters to deny computer within the local area network from accessing the Internet.

You can wither manually add a MAC address or select the MAC address from the list of

clients that are currently connected to the unit.

Enable:

Enable/Disable the MAC packet filter. Default setting is Disable.

MAC Address:

The MAC address of the computer in the LAN (Local Area Network) to be

used in the MAC filter table. Enter the MAC address of LAN port, e.g. 00:00:27:88:81:18

Block:

You can block the MAC address of the LAN computer always or by schedule.

Day:

If Block set to “by Schedule”, you need to determine which day(s) will be performed.

Time:

If Block set to “by Schedule”, you need to determine which time will be performed

Action:

Insert a new MAC packet filter or update a specified MAC packet filter.

3.2.7 URL Filter

With security reason, the URL Filter provides the enterprise to manage and restrict

employee access to non-business or undesirable content on the Internet. URL Filter is a web

solution that blocks web-sites access according the URL Filter String no matter the URL string

is found full or partial matched with a keyword.

Click URL Filter on Network Settings, below screen will prompt for URL Filter setting.

Enable:

Enable/Disable the URL Filter. Default setting is Disable.