Alcatel-Lucent 6850-48 网络指南

Configuring IPMVLAN

Configuring IP Multicast VLAN

page 43-10

OmniSwitch AOS Release 6 Network Configuration Guide

To remove an IPMVLAN, use the no form of the 

 command by entering no vlan ipmvlan 

followed by the IPMVLAN ID, as shown below:

-> no vlan ipmvlan 1003

To remove multiple IPMVLANs, specify a range of IPMVLAN IDs. For example:

-> no vlan ipmvlan 1010-1017

The following subsections describe how to assign an IPv4 or IPv6 address to an existing 
IPMVLAN as well as delete the same with the 

 command.

To assign an IPv4 or IPv6 address or range of addresses to an existing IPMVLAN, use the 

 command as shown in the examples below:

-> vlan ipmvlan 1003 address 225.0.0.1

-> vlan ipmvlan 1033 address ff08::3

-> vlan ipmvlan 1033 address 226.0.1.0/24

-> vlan ipmvlan 1033 address 224.1.1.7-224.1.1.9

-> vlan ipmvlan 1033 address ffae::7-ffae::9

To delete an IPv4 or IPv6 address from an existing IP Multicast VLAN, use the no form of the 

 command by entering no vlan ipmvlan followed by the IPMVLAN ID, the 

keyword address, and either the IPv4 or IPv6 address, as shown below:

-> no vlan ipmvlan 1003 address 225.0.0.1

-> no vlan ipmvlan 1033 address ff08::3

-> no vlan ipmvlan 1033 address 226.0.1.0/24

-> no vlan ipmvlan 1033 address 224.1.1.7-224.1.1.9

-> no vlan ipmvlan 1033 address ffae::7-ffae::9

The following subsections describe how to assign and delete a customer VLAN tag (c-tag) in an IPMV-
LAN using the 

 command.

To assign c-tag to an IP Multicast VLAN, use the 

 command as shown below:

-> vlan ipmvlan 1003 ctag 10