Alcatel-Lucent 6850-48 网络指南

Configuring Static Link Aggregation Groups

Configuring Static Link Aggregation

page 22-8

OmniSwitch AOS Release 6 Network Configuration Guide

The following subsections describe how to create and delete static link aggregate groups with the 

You can create up to 32 static and/or dynamic link aggregation groups per a standalone switch or a stack 
of switches. To create a static aggregate group on a switch, enter static linkagg followed by the user-spec-
ified aggregate number (which can be 0 through 31), size, and the number of links in the static aggregate 
group, which can be 2, 4, or 8.

For example, to create static aggregate group 5 that consists of eight links, on a switch, you would enter:

-> static linkagg 5 size 8

Note. The number of links assigned to a static aggregate group should always be close to the number of 
physical links that you plan to use. For example, if you are planning to use 2 physical links you should 
create a group with a size of 2 and not 4 or 8.

As an option you can also specify a name and/or the administrative status of the group by entering static 
linkagg followed by the user-specified aggregate number, size, the number of links in the static aggregate 
group, name, the optional name (which can be up to 255 characters long), admin state, and either enable 
or disable (the default is enable).

For example, to create static aggregate group 5 called “static1” consisting of eight links that is administra-
tively disabled enter:

-> static linkagg 5 size 8 name static1 admin state disable

Note. If you want to specify spaces within a name for a static aggregate group the name must be specified 
within quotes (e.g., “Static Aggregate Group 5”).

To delete a static aggregation group from a switch use the no form of the 

 command by 

entering no static linkagg followed by the number that identifies the group. For example, to remove static 
aggregate group 5 from a switch’s configuration you would enter:

-> no static linkagg 5

Note. You must delete any attached ports with the 

 command before you can delete a 

static link aggregate group.