Alcatel-Lucent 6850-48 ネットワークガイド
Configuring Static Link Aggregation Groups
Configuring Static Link Aggregation
page 22-8
OmniSwitch AOS Release 6 Network Configuration Guide
September 2009
Creating and Deleting a Static Link Aggregate Group
The following subsections describe how to create and delete static link aggregate groups with the
Creating a Static Aggregate Group
You can create up to 32 static and/or dynamic link aggregation groups per a standalone switch or a stack
of switches. To create a static aggregate group on a switch, enter static linkagg followed by the user-spec-
ified aggregate number (which can be 0 through 31), size, and the number of links in the static aggregate
group, which can be 2, 4, or 8.
of switches. To create a static aggregate group on a switch, enter static linkagg followed by the user-spec-
ified aggregate number (which can be 0 through 31), size, and the number of links in the static aggregate
group, which can be 2, 4, or 8.
For example, to create static aggregate group 5 that consists of eight links, on a switch, you would enter:
-> static linkagg 5 size 8
Note. The number of links assigned to a static aggregate group should always be close to the number of
physical links that you plan to use. For example, if you are planning to use 2 physical links you should
create a group with a size of 2 and not 4 or 8.
physical links that you plan to use. For example, if you are planning to use 2 physical links you should
create a group with a size of 2 and not 4 or 8.
As an option you can also specify a name and/or the administrative status of the group by entering static
linkagg followed by the user-specified aggregate number, size, the number of links in the static aggregate
group, name, the optional name (which can be up to 255 characters long), admin state, and either enable
or disable (the default is enable).
linkagg followed by the user-specified aggregate number, size, the number of links in the static aggregate
group, name, the optional name (which can be up to 255 characters long), admin state, and either enable
or disable (the default is enable).
For example, to create static aggregate group 5 called “static1” consisting of eight links that is administra-
tively disabled enter:
tively disabled enter:
-> static linkagg 5 size 8 name static1 admin state disable
Note. If you want to specify spaces within a name for a static aggregate group the name must be specified
within quotes (e.g., “Static Aggregate Group 5”).
within quotes (e.g., “Static Aggregate Group 5”).
Deleting a Static Aggregate Group
To delete a static aggregation group from a switch use the no form of the
command by
entering no static linkagg followed by the number that identifies the group. For example, to remove static
aggregate group 5 from a switch’s configuration you would enter:
aggregate group 5 from a switch’s configuration you would enter:
-> no static linkagg 5
command before you can delete a
static link aggregate group.