Alcatel-Lucent 6850-48 参考指南
Power over Ethernet (PoE) Commands
OmniSwitch CLI Reference Guide
September 2009
page 4-5
lanpower stop
Manually disables power on a single specified PoE port or on all PoE ports in a specified slot.
lanpower stop {slot/port[-port2] | slot}
Syntax Definitions
slot/port
Disables inline power on the specified PoE port only.
port2
The last port number in a range of ports that you want to configure on
the same slot (e.g, 3/1-4 specifies ports 1-4 on slot 3).
the same slot (e.g, 3/1-4 specifies ports 1-4 on slot 3).
slot
Disables inline power on all PoE ports in the corresponding slot.
Defaults
Power over Ethernet operational status is globally disabled by default.
Platforms Supported
OmniSwitch 6400, 6850, 6855, 9000
Usage Guidelines
N/A
Examples
-> lanpower stop 5/22
-> lanpower stop 5
-> lanpower stop 5/22-27
Release History
Release 6.1; command was introduced.
Related Commands
MIB Objects
alaPethMainPseGroup
alaPethMainPseAdminStatus
pethPsePortTable
pethPsePortAdminEnable
Activates inline power on a single specified PoE port or on
all PoE ports in a specified slot.
all PoE ports in a specified slot.
Displays current inline power status and related statistics for
all PoE ports in a specified slot.
all PoE ports in a specified slot.