Alcatel-Lucent 6850-48 参考指南
BFD Commands
OmniSwitch CLI Reference Guide
September 2009
page 39-21
ip ospf bfd-std all-interfaces
Enables or disables BFD for all OSPF interfaces in the switch configuration.
ip ospf bfd-std all-interfaces
no ip ospf bfd-std all-interfaces
Syntax Definitions
N/A
Defaults
N/A
Platforms Supported
OmniSwitch 6400, 6850, 6855, 9000, 9000E
Usage Guidelines
• Use the no form of this command to disable the BFD status for all OSPF interfaces.
• The BFD status for OSPF must be enabled before OSPF can interact with BFD.
Examples
-> ip ospf bfd-std all-interfaces
-> no ip ospf bfd-std all-interfaces
Release History
Release 6.3.4; command was introduced.
Related Commands
MIB Objects
alaProtocolospf
alaOspfBfdAllInterfaces
Enables or disables the BFD status for the OSPF protocol.
Enables or disables BFD for a specific OSPF interface.
Establishes BFD sessions only on neighbors in full state.
Establishes BFD sessions with all neighbors of the corresponding
interface which are greater than or equal to “2-way” state.
interface which are greater than or equal to “2-way” state.