Alcatel-Lucent 6850-48 参考指南
BFD Commands
page 39-22
OmniSwitch CLI Reference Guide
September 2009
ip ospf interface bfd-std
Enables or disables BFD for a specific OSPF interface.
ip ospf interface interface-name bfd-std {enable | disable}
Syntax Definitions
interface-name
The name of an existing OSPF interface.
enable
Enables the OSPF interface.
disable
Disables the OSPF interface.
Defaults
Platforms Supported
OmniSwitch 6400, 6850, 6855, 9000, 9000E
Usage Guidelines
The BFD status for OSPF must be enabled before OSPF can interact with BFD.
Examples
-> ip ospf interface int1 bfd-std enable
-> ip ospf interface int2 bfd-std disable
Release History
Release 6.3.4; command was introduced.
Related Commands
MIB Objects
alaOspfIfAugEntry
ospfIfIpAddress
alaOspfIfBfdStatus
parameter
default
enable | disable
disable
Enables or disables the BFD status for the OSPF protocol.
Enables or disables BFD for all OSPF interfaces configured.
Establishes BFD sessions only on neighbors in full state.
Establishes BFD sessions with all neighbors of the corresponding
interface which are greater than or equal to “2-way” state.
interface which are greater than or equal to “2-way” state.