Alcatel-Lucent 6850-48 参考指南

BGP Commands

OmniSwitch CLI Reference Guide

page 44-193

Configures support for the graceful restart feature on a BGP router.

N/A

Graceful restart is enabled by default.

OmniSwitch 6850, 6855, 9000, 9000E

• Use the no form of this command to disable support for the graceful restart feature on a BGP router. It 

has only unplanned graceful restart.

• The minimum hardware configuration for this command is a redundant CMM configuration. This 

command is not supported on a chassis with a single CMM or on an in a standalone switch.

• On an OmniSwitch stackable switch graceful restart is supported only on active ports (i.e., interfaces) 

that are on the secondary or idle modules in a stack during a takeover. It is not supported on ports on a 
primary element in a stack.

• Note that graceful restart does not support IPv6 prefixes at this time.

-> ip bgp graceful restart

-> no ip bgp graceful restart

Release 6.1.3; command was introduced.

alaBgpGlobal

alaBgpGracefulRestart

alaBgpRestartInterval

Displays the current global settings for the local BGP speaker.